Nếu cập nhật một thuộc tính do bản cập nhật trên một thuộc tính khác là những gì bạn đang tìm kiếm [thay vì tính toán lại giá trị của thuộc tính hạ nguồn trên truy cập], hãy sử dụng các setters thuộc tính:
Nội phân Chính showShow
- Các thuộc tính không tự động thay đổi
- Chúng tôi không sử dụng các phương thức getter
- Chúng tôi thích các thuộc tính hơn các phương thức getter
- Làm thế nào để bạn thay đổi thuộc tính lớp trong Python?
- Làm thế nào để bạn truy cập các thuộc tính của một lớp trong Python?
- Thuộc tính trong lớp Python là gì?
- Làm thế nào để bạn khởi tạo một thuộc tính lớp trong Python?
Nội phân chính
- Các thuộc tính không tự động thay đổi
- Chúng tôi không sử dụng các phương thức getter
- Chúng tôi thích các thuộc tính hơn các phương thức getter
- Làm thế nào để bạn thay đổi thuộc tính lớp trong Python?
- Làm thế nào để bạn truy cập các thuộc tính của một lớp trong Python?
- Thuộc tính trong lớp Python là gì?
- Làm thế nào để bạn khởi tạo một thuộc tính lớp trong Python?
Nội phân chính
- Các thuộc tính không tự động thay đổi
- Chúng tôi không sử dụng các phương thức getter
- Chúng tôi thích các thuộc tính hơn các phương thức getter
- Làm thế nào để bạn thay đổi thuộc tính lớp trong Python?
- Làm thế nào để bạn truy cập các thuộc tính của một lớp trong Python?
- Thuộc tính trong lớp Python là gì?
- Làm thế nào để bạn khởi tạo một thuộc tính lớp trong Python?
Nội phân chính
- Các thuộc tính không tự động thay đổi
- Chúng tôi không sử dụng các phương thức getter
- Chúng tôi thích các thuộc tính hơn các phương thức getter
- Làm thế nào để bạn thay đổi thuộc tính lớp trong Python?
- Làm thế nào để bạn truy cập các thuộc tính của một lớp trong Python?
- Thuộc tính trong lớp Python là gì?
- Làm thế nào để bạn khởi tạo một thuộc tính lớp trong Python?
class SomeClass[object]:
def __init__[self, n]:
self.list = range[0, n]
@property
def list[self]:
return self._list
@list.setter
def list[self, val]:
self._list = val
self._listsquare = [x**2 for x in self._list ]
@property
def listsquare[self]:
return self._listsquare
@listsquare.setter
def listsquare[self, val]:
self.list = [int[pow[x, 0.5]] for x in val]
>>> c = SomeClass[5]
>>> c.listsquare
[0, 1, 4, 9, 16]
>>> c.list
[0, 1, 2, 3, 4]
>>> c.list = range[0,6]
>>> c.list
[0, 1, 2, 3, 4, 5]
>>> c.listsquare
[0, 1, 4, 9, 16, 25]
>>> c.listsquare = [x**2 for x in range[0,10]]
>>> c.list
[0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
Nội phân chính • Python 3.7—3.10
Đọc 2 phút • Python 3.7.
02:28
Xem dưới dạng video
Đăng nhập vào tài khoản Python Barsels của bạn để lưu cài đặt screencast của bạn.
Vẫn chưa có tài khoản? Đăng ký tại đây.
Các thuộc tính không tự động thay đổi
Hãy nói về cách tạo thuộc tính tự động cập nhật trong Python.
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
Chúng tôi có một lớp
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
0:>>> rect = Rectangle[3, 4]
Khi chúng tôi gọi lớp này, chúng tôi sẽ nhận được một đối tượng
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
0:>>> rect.width
3
>>> rect.height
4
>>> rect.area
12
Đối tượng
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
0 này có class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
3, class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
4 và class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5:>>> rect.width = 10
>>> rect.area
12
Nếu chúng tôi đang xem xét chấp nhận được để thay đổi
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
3 hoặc class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
4 hoặc đối tượng ____10 hiện tại, chúng tôi có thể gặp vấn đề. Nếu chúng ta thay đổi class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
3 của class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
0, class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5 sẽ không tự động thay đổi:we only assigned the class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5 one time: in our initializer method. When we first make a class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
0 object, we set the class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5 in our >>> rect = Rectangle[3, 4]
5 method, and that's it.Chúng tôi không sử dụng các phương thức getter
Điều này xảy ra bởi vì chúng tôi chỉ gán
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5 một lần: trong phương thức khởi tạo của chúng tôi. Khi chúng tôi lần đầu tiên tạo một đối tượng class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
0, chúng tôi đặt class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5 theo phương thức >>> rect = Rectangle[3, 4]
5 của chúng tôi và đó là nó.class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
def area[self]:
return self.width * self.height
Trong rất nhiều ngôn ngữ lập trình, thông thường để khắc phục vấn đề này bằng cách tạo phương thức getter. Thay vì thuộc tính
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5, chúng tôi sẽ tạo một phương thức [có thể được gọi là >>> rect = Rectangle[3, 4]
7 hoặc chỉ class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5]:>>> rect = Rectangle[3, 4]
>>> rect.area
Khi chúng tôi truy cập phương thức
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5 ngay bây giờ, chúng tôi sẽ thấy rằng đó là một phương thức ràng buộc:Chúng tôi không thể truy cập
>>> rect.width
3
>>> rect.height
4
>>> rect.area
12
0 để có được khu vực của chúng tôi nữa. Chúng tôi phải gọi phương thức class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5 để có được kết quả:Bây giờ nếu chúng tôi cập nhật
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
3 của đối tượng class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
0 của chúng tôi:Và gọi phương thức
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5:Python sẽ tái hiện khu vực và cho chúng tôi trở lại kết quả chính xác.writing getter methods is not common. Instead of using getter method, we tend to make a property.
Chúng tôi thích các thuộc tính hơn các phương thức getter
Trong Python, phương pháp viết getter không phổ biến. Thay vì sử dụng phương thức Getter, chúng ta có xu hướng tạo một tài sản.
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
@property
def area[self]:
return self.width * self.height
Chúng tôi đang sử dụng trình trang trí
>>> rect.width
3
>>> rect.height
4
>>> rect.area
12
5 ở đây:Đó được gọi là một người trang trí vì cú pháp
>>> rect.width
3
>>> rect.height
4
>>> rect.area
12
6 đó.the property decorator, it will make what was previously a method into a
property.Khi chúng tôi sử dụng bộ trang trí tài sản, nó sẽ biến những gì trước đây là một phương thức thành một tài sản.
>>> rect = Rectangle[3, 4]
>>> rect.area
12
Bây giờ nếu chúng ta tạo một đối tượng
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
0, giống như trước đây và chúng ta truy cập thuộc tính class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5:we don't need to put parentheses after class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5! In fact, we can't put parentheses. Simply by accessing the class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5 attribute we get our answer.Không giống như trước đây, chúng ta không cần đặt dấu ngoặc đơn sau
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5! Trên thực tế, chúng ta không thể đặt dấu ngoặc đơn. Đơn giản chỉ bằng cách truy cập thuộc tính class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5, chúng tôi nhận được câu trả lời của chúng tôi.>>> rect.width = 10
>>> rect.area
40
Vì vậy, nếu chúng tôi thay đổi
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
3 hoặc class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
4 và chúng tôi sẽ truy cập lại class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5, nó sẽ tự động kết hợp lại khu vực:isn't actually storing the
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5 attribute anywhere. Instead, every time the class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5 attribute is accessed, it calls class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5 method and gives us back whatever the return value is. And it does this automatically, simply because we accessed the >>> rect.width
3
>>> rect.height
4
>>> rect.area
12
0 attribute.Vì vậy, Python không thực sự lưu trữ thuộc tính class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5 ở bất cứ đâu. Thay vào đó, mỗi khi thuộc tính class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5 được truy cập, nó gọi phương thức class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
5 và cung cấp cho chúng tôi bất cứ giá trị trả về nào. Và nó thực hiện điều này một cách tự động, đơn giản vì chúng tôi đã truy cập thuộc tính >>> rect.width
3
>>> rect.height
4
>>> rect.area
12
0.
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
class Rectangle:
def __init__[self, width, height]:
self.width = width
self.height = height
self.area = self.width * self.height
>>> rect.width
3
>>> rect.height
4
>>> rect.area
12
Bản tóm tắt
Nếu bạn muốn tạo một thuộc tính trên một đối tượng trong Python tự động cập nhật, bạn có thể sử dụng thuộc tính.
Sê -ri: Thuộc tính
Chúng tôi không sử dụng các phương thức Getter và Setter trong Python. Thay vào đó chúng tôi làm cho các thuộc tính.
Các thuộc tính cho phép chúng tôi tùy chỉnh những gì xảy ra khi bạn truy cập một thuộc tính và những gì xảy ra khi bạn gán cho một thuộc tính.
Để theo dõi tiến trình của bạn trên con đường chủ đề Python Barsels này, đăng nhập hoặc đăng ký.
✕
↑
Một mẹo Python mỗi tuầnfill-in gaps in your Python skills? I send weekly emails designed to do just that.
Làm thế nào để bạn thay đổi thuộc tính lớp trong Python?
Cần lấp đầy khoảng trống trong các kỹ năng trăn của bạn? Tôi gửi email hàng tuần được thiết kế để làm điều đó.ClassName. AttributeName. Otherwise, you will create a new instance variable.
Làm thế nào để bạn truy cập các thuộc tính của một lớp trong Python?
Truy cập các thuộc tính của một lớp getAttr [] - phương thức Python được sử dụng để truy cập thuộc tính của một lớp.HasAttr [] - Một phương thức Python được sử dụng để xác minh sự hiện diện của một thuộc tính trong một lớp.setAttr [] - một phương thức python được sử dụng để đặt một thuộc tính bổ sung trong một lớp.getattr[] − A python method used to access the attribute of a class. hasattr[] − A python method used to verify the presence of an attribute in a class. setattr[] − A python method used to set an additional attribute in a class.
Thuộc tính trong lớp Python là gì?
Các thuộc tính lớp Python là các biến của một lớp được chia sẻ giữa tất cả các trường hợp của nó.Chúng khác với các thuộc tính thể hiện trong các thuộc tính đó chỉ được sở hữu bởi một trường hợp cụ thể của lớp và không được chia sẻ giữa các trường hợp.variables of a class that are shared between all of its instances. They differ from instance attributes in that instance attributes are owned by one specific instance of the class only, and are not shared between instances.
Làm thế nào để bạn khởi tạo một thuộc tính lớp trong Python?
Vì Python sẽ tự động gọi phương thức __init __ [] ngay sau khi tạo một đối tượng mới, bạn có thể sử dụng phương thức __init __ [] để khởi tạo các thuộc tính của đối tượng.Sau đây xác định lớp người với phương thức __init __ []: Lớp người: def __init __ [tự, tên, tuổi]: self.name = tên tự.use the __init__[] method to initialize the object's attributes. The following defines the Person class with the __init__[] method: class Person: def __init__[self, name, age]: self.name = name self.