Là một website được viết trên công nghệ web Flutter vì vậy hỗ trợ rất tốt cho người học, kể cả những người học khó tính nhất.
Hiện tại website đang tiếp tục được cập nhập nội dung cho phong phú và đầy đủ hơn. Mong các bạn nghé thăm và ủng hộ website mới của chúng tôi.
1- HTML Paragraph
Phần tử trong HTML đại diện cho một đoạn văn [paragraph]. Một đoạn văn thường hiển thị như một khối [block], nó tách biệt với các khối khác bởi một dòng trống [blank line] hoặc dòng đầu tiên của nó hơi thụt lề [indent].
Paragraphs
Geckos are a group of usually small, usually nocturnal lizards.
They are found on every continent except Australia.
Some species live in houses where they hunt insects attracted by artificial light.
Phần tử thường được sử dụng cho các nội dung văn bản. Nó có thể chứa các Inline element [phần tử nội tuyến]. Bạn không nên sử dụng nó để chứa các block-level element [phần tử khối]. Bộ phân tích HTML [HTML parser] sẽ tự động đóng đoạn văn [paragraph] nếu nó bắt gặp một block-level element xuất hiện bên trong thẻ mở và thẻ đóng
.Các thẻ không nên xuất hiện bên trong được gọi là "Tag Omission".
The paragraph does not allow
a block-level element
to stay within it.I am adding Markdown support to my CMS editor.
When writing Markdown content, how do I create two empty lines?
I have been trying, but I always get only one line.
asked Dec 12, 2013 at 12:21
Miguel MouraMiguel Moura
34.1k75 gold badges231 silver badges426 bronze badges
3
If your Markdown compiler supports HTML, you can add
answered Dec 12, 2013 at 12:38
5
I test on a lot of Markdown implementations. The non-breaking space ASCII character
For example:
Hello
world!
answered Feb 20, 2015 at 16:30
ngungongungo
4,6224 gold badges27 silver badges36 bronze badges
8
I only know the options below. It would be great to take a list of all of them and comment them differences
# RAW ## Creates 2 Lines that CAN be selected as text ## ------------------------------------------------- ### The non-breaking space ASCII character ### HTML tag
## Creates 2 Lines that CANNOT be selected as text ## ------------------------------------------------- ### HTML Entity ### Backticks with a space inside followed by two spaces `[space]`[space][space] `[space]`[space][space] #### sample: ` ` ` ` # Endanswered Feb 2, 2018 at 13:35
Héctor LeónHéctor León
2,0101 gold badge21 silver badges36 bronze badges
3
Basically, if the library you are using is CommonMark-compliant, you can add multiple hard line breaks [
A line break [not in a code span or HTML tag] that is preceded by two or more spaces and does not occur at the end of a block is parsed as a hard line break [rendered in HTML as a
tag]and then...
For a more visible alternative, a backslash before the line ending may be used instead of two spaces
The specification is quite clear. However, the library I have been using MarkDig, doesn't quite work with the two spaces technique [must be a bug], but it works flawlessly with a backlash.
That said, this input...
Line one\ \ \ \ Line twowill produce four hard line breaks after "Line one". You can see it here [using backlash]...
//babelmark.github.io/?text=Line+one%5C%0A%5C%0A%5C%0A%5C%0ALine+two%0A
Notice how all CommonMark-compliant implementations will get it right.
answered May 8, 2018 at 12:39
LeoLeo
14.4k2 gold badges36 silver badges54 bronze badges
2
In Markdown flavours that support equation output, the following should work on a line by itself, with empty lines before and after [repeat for more lines]:
$~$
It is basically an equation containing nothing but a single equation-white-space. The benefit is that in Markdown flavours that include both PDF and HTML output options [including Rmarkdown], it should be understood in the same way for both output types, whereas I'm not sure how PDF output would interpret
oranswered Feb 13, 2017 at 9:48
MagnusMagnus
22.3k1 gold badge28 silver badges28 bronze badges
1
Backtick quotes with a space inside and two spaces to follow. Repeat as needed for more lines:
text1 text1 `[space]`[space][space] `[space]`[space][space] text2 text2It looks decent in Markdown source:
text1 text1 ` ` ` ` text2 text2answered Aug 23, 2018 at 2:30
greenhyenagreenhyena
991 silver badge1 bronze badge
1
You can use
\ \.answered Jun 10, 2020 at 18:39
0
You can do it perfectly using this:
texttextexttexttext texttexttexttexttextanswered Jan 19, 2018 at 20:46
1
In GitHub Wiki markdown I used hash marks [#] followed by two spaces to make the line break larger. It doesn't actually give you multiple line breaks but it made one large line break and served me well for my needs.
Instead of:
text [space][space] more textI did:
text [hash mark][space][space] more textDharman♦
28k21 gold badges75 silver badges127 bronze badges
answered Jul 6, 2018 at 13:22
1
For an empty line in Markdown, escape a space [
\], and then add a new line.Example:
"\
"
Remember: escape a space and escape a new line. That way is Markdown compliant and should compile properly in any compiler. You may have to select the example text to see how it is set up.
answered Apr 21, 2017 at 21:27
1
You can use the sequence of a no-break space [
U+00a0] followed by two spaces [U+0020×2] followed by a newline [U+000a] repeatedly to achieve this. Two or more times is required depending on your use case.Using [not markdown interpreted here, but] actual white space characters [theoretically copy-and-paste-able]:
Preceding Following.
answered May 11, 2017 at 19:13
If you are using a library like markdown-it or PythonMarkdown this can also be solved by replacing two line breaks [in Regex
/\n\n$/gm] with a line break and an invisible character [\n] before rendering. Note that the character after\nis an Alt+0160 or an invisible character.For example, using markdown-it [although it work for any other lib too] with the input:
1 2 3 4 5Rendered with
md.render[string.data.replace[/\n\n$/gm, "\n "]]you will get:answered Feb 21, 2021 at 1:55
adelriosantiagoadelriosantiago
7,3866 gold badges34 silver badges67 bronze badges
2
I tried everything but this worked for me while using Pandoc markdown with TexLive as LaTex engine. In order to add blank lines, you can try adding a blank line but remove ""
## \newlineJust repeat the above, each will add a new blank line
Dharman♦
28k21 gold badges75 silver badges127 bronze badges
answered Apr 23, 2019 at 18:53
I don't know if it works with other editors, but in VSCode a simple # followed immediately by a newline does the trick for my purposes and can be repeated infinitely. [Unlike the backtick quotes which have zero output there]
It is in fact an empty title line, though - so any document outline or auto-formatting might look funky.
answered Apr 17, 2020 at 12:37
RautermannRautermann
1952 silver badges9 bronze badges
new, three blank line. goodluck
answered May 22 at 9:26
This HTML entity which means "non-breaking space" will help you for each line break
answered Apr 2, 2020 at 20:23
1
Try adding multiple spaces [two spaces = one
mycode[space][space][space][space]Dharman♦
28k21 gold badges75 silver badges127 bronze badges
answered Dec 21, 2014 at 23:47
1
Chủ Đề