- Hàm ftell[] dùng để trả về vị trí hiện tại của con trỏ tập tin trong một tập tin đang được mở.
- Cú pháp:
ftell[tập tin đang được mở]
- Tôi có một cây thư mục như sau:
- myCode.php
- file
- test.txt
- Phía dưới là nội dung của tập tin test.txt
- Đoạn mã phía dưới là nội dung của tập tin myCode.php
- Khi đó, trên màn hình sẽ hiển thị:
0
10
Hàm ftell[]
sẽ trả về vị trí hiện tại của con trỏ tệp tin.
Bài viết này được đăng tại freetuts.net, không được copy dưới mọi hình thức.
Cú pháp
Cú pháp: ftell[ $handle];
Trong đó:
$handle
là file đã được mở trước đó bởi hàmfopen[]
.
Kết quả trả về
Hàm sẽ trả về vị trí hiện tại của con trỏ tập tin, nếu xảy ra lỗi hàm sẽ trả về False.
Bài viết này được đăng tại [free tuts .net]
Ví dụ
Ví dụ đơn giản về hàm ftell[]
:
Code
$fp = fopen['test.txt', 'r+']; echo ftell[$fp] ."
"; fseek[$fp, 5]; echo ftell[$fp];
Tham khảo: php.net
- Hàm ftell[] dùng để trả về vị trí hiện tại của con trỏ tập tin trong một tập tin đang được mở.
- Cú pháp:
ftell[tập tin đang được mở]
- Tôi có một cây thư mục như sau:
- myCode.php
- file
- test.txt
- Phía dưới là nội dung của tập tin test.txt
- Đoạn mã phía dưới là nội dung của tập tin myCode.php
- Khi đó, trên màn hình sẽ hiển thị:
0
10
[PHP 4, PHP 5, PHP 7, PHP 8]
ftell — Returns the current position of the file read/write pointer
Description
ftell[resource
$stream
]: int|false
Parameters
stream
The file pointer must be valid, and must point to a file successfully opened by fopen[] or popen[]. ftell[] gives undefined results for append-only streams [opened with "a" flag].
Return Values
Returns the position of the file pointer referenced by stream
as an integer; i.e., its
offset into the file stream.
If an error occurs, returns false
.
Note: Because PHP's integer type is signed and many platforms use 32bit integers, some filesystem functions may return unexpected results for files which are larger than 2GB.
Examples
Example #1 ftell[] example
See Also
- fopen[] - Opens file or URL
- popen[] - Opens process file pointer
- fseek[] - Seeks on a file pointer
- rewind[] - Rewind the position of a file pointer
Mindaugas ¶
7 years ago
When opening a file for reading and writing via fopen['file','a+'] the file pointer should be at the end of the file. However ftell[] returns int[0] even if the file is not empty. Also it seems that there is two pointers, first for reading and second for writing, because it acts differently on first operation [reading or writing].
Example:
Result:
0 "123456789" 9
0 "123456789" 9
2 "3456789" 9
2 "" 2
0 "rr3456789aa" 11
burninleo at gmx dot net ¶
13 years ago
When opening a file to append via fopen['file','ab'] the file pointer should be at the end of the file. However ftell[] returns int[0] even if the file is not empty and even after writing some text into the file.
mbirth at webwriters dot de ¶
16 years ago
Attention! If you open a file with the "text"-modifier [e.g. 'rt'] and the file contains \r\n as line-endings, ftell[] returns the position as if there were only \n as line-endings.
Example:
If the first line only contains 1 char followed by \r\n, the start of the second line should be position 3. [1char + \r + \n = 3 bytes] But ftell[] will return 2 - ignoring one byte. If you call ftell[] in line 3, the value will differ from the real value by 2 bytes. The error gets greater with every line.
[Watched this behavior in PHP 5.0.4 for Windows.]
BUT: fseek[] works as expected - using the true byte values.
mweierophinney at gmail dot com ¶
17 years ago
Actually, ftell[] gives more than an undefined result for append only streams; it gives the offset from the end of the file as defined before any data was appended. So if you open a file that had 3017 characters, and append 41 characters, and then execute ftell[], the value returned will be 41.
missilesilo at gmail dot com ¶
15 years ago
In response to php at michielvleugel dot com:
This does not seem to be the case with PHP 5.2.0 and FreeBSD 5.4.
#!/usr/local/bin/php
[email protected]:/home/david# echo Hello World | ./test.php
int[0]
[email protected]:/home/david# ./test.php
int[6629927]
When something is piped to the script, it returns an integer value of 0, however, it also returns an integer when nothing is piped to the script.
The code should be modified to this:
[email protected]:/home/david# echo Hello World | ./test.php#!/usr/local/bin/php
And the result is:
Something was piped: Hello World
[email protected]:/home/david# ./test.php
Nothing was piped
php at michielvleugel dot com ¶
17 years ago
When trying to determine whether or not something was piped into a command line script, it is not smart to do a fgets[STDIN], because it will wait indefenitely if nothing is piped. Instead, I found ftell on STDIN to be very handy: it will return an integer of zero when something was piped, and nothing if nothing was piped to the script.
#!/usr/bin/php4 -q