MacBook Air 11" [Mid 2011-Early 2015] Battery
MacBook Air 11" [Mid 2011-Early 2015] Battery
SKU: IF108-063-2
$115.99 AUD
We don't have that much stock available
Product Details
Description
This MacBook Air 11" [Mid 2011-Early 2015] replacement battery is what you need to bring your dead laptop back to life!
- 100% factory tested.
- Tested and guaranteed to have a capacity greater than 4850 mAh.
- Spot tested by iFixit staff in San Luis Obispo, CA to ensure consistency of quality and capacity.
Battery degradation is an inevitable part of your laptop's lifespan, extend it with this new replacement battery compatible with Mid 2011 to Early 2015 model 11" MacBook Airs. Factory-installed MacBook Air batteries are rated to last 1,000 cycles. If your laptop won't turn on, turns off suddenly, has a "service battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it. Our aftermarket replacement batteries lead the industry in quality and reliability, so you know you're getting the best money can buy.
Part Assembly Includes
Kit Contents
- New Replacement Battery Compatible with a MacBook Air 11" [Mid 2011-Early 2015]
- Spudger
- iFixit Precision Bit Driver
- Precision 4 mm Bits:
- Pentalobe P5
- Torx T5
Compatibility
This part is compatible with MacBook Air 11" A1370 Mid 2011, MacBook Air 11" A1465 Mid 2012 to Early 2015.
Specifications
A1495, A1406 |
38.75 Wh |
7.6 V |
5100 mAh |
Aftermarket |
guarantee
- One year warranty
Use this guide to replace a faulty battery in a MacBook Air 11" Early 2015.
Note: If there is a thin plastic film on your replacement battery, do not attempt to remove it. It is glued on and protects the battery pack while it is inside the MacBook.
-
Shut down and close your computer. Lay it on a soft surface top-side down.
-
Remove the following ten screws:
-
Two 8 mm 5-point Pentalobe screws
-
Eight 2.5 mm 5-point Pentalobe screws
-
The special screwdriver needed to remove the 5-point Pentalobe screws can be found here.
-
-
Remove the following five screws securing the battery to the upper case:
-
Two 5.2 mm T5 Torx screws
-
One 6 mm T5 Torx screw
-
Two 2.6 mm T5 Torx screws
-