Lỗi cad error could not open file for write năm 2024

Có Rất nhiều bạn sẻ lúng túng, mò mẫm rất lâu trên mạng và không hiểu nên làm gì / error liên tục mà không kết nối mượt mà như các trang chia sẻ (811, network.. bla bla) Bài viết này nhắm tới việc thuận tiện nhất cho các bạn không rành rọt gì về công nghệ để fix. -----Đơn giản. Luôn làm được ! ------- Chúng ta cần Tải:unjaibreak từ...gg Các phần mềm bên dưới bấm cái 1 là ra:

ifunbox

3utool

JB bằng mọi cách tạm thời : Electra, Yalu,...tùy từng loại ios -> mục đích để mở được SSH

Tải WinSCP -> để can thiệp tận gốc để di chuyển file thôi

PuTTy -> để thực hiện nhiệm vụ như Teminal - cái này dùng cydia inp... hay bị lỗi liên tục, do vậy dùng PuTTy ngon hơn rất nhiều.

Bắt đầu :

Sử dụng ifunbox ném file unjaibreak vào mục books ( thư mục nào mình nhớ cũng dc ) : Toolbox -> file sysstem

software. It is a primarily binary format that not only stores but describes the content of 2D designs and 3D models as well as their associated metadata. It typically comprises several complete sections, which include the header, classes, object data (graphical and non-graphical objects), and handles. However, the writing process can sometimes be interrupted, leading to incomplete sections. Other times, the sections may not be fully copied during file transmittal/transfer, resulting in incomplete files. Or, the software may not be outdated, rendering it unable to open newer versions of the DWG format. When you attempt to open such files with AutoCAD, the software displays the ‘Drawing File is Not Valid’ error message.

Drawing File is Not Valid Error Message in AutoCAD

In this article, we will explore the various factors that can cause the ‘Drawing File is Not Valid’ error. Additionally, we will detail the appropriate troubleshooting techniques as well as the procedure to follow. Finally, we will discuss tips on how to avoid the error. In all, we aim to help you resolve the issue as soon as possible, enabling you to seamlessly get back to your project.

Table of Contents

Understanding the ‘Drawing File is Not Valid’ Error Message

The ‘Drawing File is Not Valid’ error message can disorient your workflow. With the internet being home to plenty of resources, troubleshooting can be nothing short of the proverbial finding a needle in a haystack. Fortunately, this article covers all bases, providing a clear roadmap to resolve the error. In particular, we have explored the causes and delved into how you can solve each of these issues. It is essential to follow a specific order when resolving the issues. This is because this orderly approach allows you to eliminate one possible cause after another, eventually arriving at the main culprit. Once you have solved the issue, it is equally important to implement measures that help you avoid the ‘Drawing File is Not Valid’ error in the future. For instance, you should keep your OS and AutoCAD up to date as well as regularly save and back up your drawing files. But more importantly, you should be prepared for any eventuality.

"I am trying to edit sources.list using vi editor but getting the following error while saving the file:

/etc/apt/sources.list" E212: Can't open file for writing" - from Stack Overflow

If you're a Linux user using Vim, you may have encountered the following error while trying to write to a file: E212 can't open file for writing. This article will show you three ways to fix this error. All of these methods work in Ubuntu and other Debian-based distributions. Let's get started!

Workable Solutions Step-by-step Troubleshooting 1. Check File Permissions Edit the "sources.list" file using a non-root-user with the following command... 2. Check the File Lock Find the file with this command: lsattr /home/admin/$filename... 3. Fix Read-only File System Check the disk space with this command. $ df -h. Then, make space by deleting...

Reasons - E212 Can't Open File for Writing

This problem can be caused by many things, from a permissions issue to low disk space. In this part, we'll analyze the reasons. Let's get started!

When using the vi command to modify the content of a Linux file, it is found that it cannot be saved. Every time you finish writing, you can use the ":q!" command to exit normally. However, when you use the ":wq!" command to save the file and exit, these error messages prompt:

• Vim Can't Save File (E212)
• Vim can't open file for writing
• Root user can't open file for writing
• /etc/apt/sources.list" E212: Can't open file for writing
• E212: Can't open file for writing. Press ENTER or type command to continue

You receive this error for two main reasons:

• The current user has insufficient permissions.
• This file may be in use by other programs or users.

Solutions - 3 Ways to Fix Can't Open File for Writing in Vim

E212: can't open file for writing is an error that can occur when trying to save a file in Vim. There are a few different ways to fix this error, depending on the cause.

Method 1. Validate User and Check File Permissions

The general cause of the error is the permission issue. The solution is to add sudo in front of the file to temporarily provide administrator privileges when using the vi command to open the file. For example, use the command "sudo vi hosts" to open and edit the file.

Step 1. Edit the "sources.list" file using a non-root-user with the following command.

$ vim /etc/apt/sources.list

Step 2. Get "/etc/apt/sources.list" E212: Can't open file for writing" error.

Step 3. Run sudo permissions to fix the error.

$ sudo vim /etc/apt/sources.list

Method 2. Check If the File Is Locked to Fix Can't Open File for Writing

If you are a root or sudo user, but you still can't open the file for writing. Then, you can try to exit the file and check if the "I" command locks it.

Step 1. Find the file with this command:

lsattr /home/admin/$filename

Step 2. Check the I lock.

If there is an "I" displayed, the file is locked. You can execute this command to unlock your files.

chattr -i $filename

After this, execute q! to exit the file. When viewing the file again, it is found that the content has been changed and saved.

Method 3. Check for Read-only File System or Capacity Issue

You still face this error if you have permission and use the sudo command. Then, you need to check for a read-only file system or capacity issue.

Step 1. Check the disk space with this command.

$ df -h

Step 2. Then, make space by deleting or removing unnecessary files using the rm command.

Step 3. Run mount command to check for your device. It must be mounted as read-write (rw) not read-only (ro).

$ mount

Step 4. Fix the file system errors and re-mount it to a read-write file system.

$ sudo mount -o remount,rw /partition/identifier /mount/point

or

$ sudo mount -o remount,rw /

Then, you have resolved the "E212: Vim can't open file for writing" error. You can watch this video to get help if you still have problems.

• 0:17 fix can't open file for writing while using Vim
• 0:50 make sure the path
• 2:57 check the file permission

How to Recover Lost Linux Files with Software

What if you lost data after fixing the "E212: Vim can't open file for writing" error? Don't worry. EaseUS Data Recovery Wizard is a helpful tool for recovering lost data on Linux systems. It has a simple interface that makes it easy to use, even for those who need to become more familiar with data recovery programs.

• EaseUS Data Recovery Wizard can recover deleted files from any storage device, including hard drives, USB flash drives, and memory cards.
• It also supports various file types, such as photos, videos, documents, and emails.
• Best of all, EaseUS Data Recovery Wizard is very easy to use. This makes it an excellent choice for anyone who needs to recover lost data on a Linux system.

Download this software and find files in Linux.

Step 1. Select a drive and start scanning

Launch EaseUS Data Recovery Wizard and hover over the partition where you lost data. This could be an internal hard disk, external disk, USB, or SD card. Then, click "Scan".

Step 2. Check and preview scanned files

Use the file format filter on the left or upper right corner to narrow the scan results until you find the files you need. Then, you can click the "Preview" button or double-click a file to preview its content, if you'd like.

Step 3. Recover lost data to a secure location

Click the checkbox next to the file and click "Recover" to restore the lost data to a secure place. We recommend that you do not store the recovered data on the disk where you lost it earlier.

Conclusion

Follow the solutions above to fix the "can't open file for writing" error in Vim without losing data. If you have any questions or need help, feel free to reach out and contact us. We're here to help!

Can't Open File for Writing FAQs

Read the questions and answers below to get additional help.

1. What to do if you are faced with the action can't be completed error?

To fix the action can't be completed because the file is open:

• Run File Locksmith
• Stop Processes with Task Manager
• Empty the Recycle Bin and Restart
• Restart Windows Explorer
• Delete Temp Files

2. How do you fix cannot open file for writing in Vim?

You can fix the can't open file for writing in three ways:

• Check File Permissions
• Check If the File Is Locked
• Check for Read-only Memory

3. How to exit Vim in the terminal without saving?

To exit Vim without saving changes:

• Switch to command mode by pressing the Esc key.
• Press : (colon) to open the prompt bar in the bottom left corner of the window.
• Type q! after the colon and hit Enter to exit without saving the changes.

4. What is Vim used for?

Vim is a highly configurable text editor built to enable efficient text editing. It is an improved version of the vi editor distributed with most UNIX systems.