Geoslope bị lỗi reponding khi add file dfx năm 2024

Rigorous analytical capability. Sophisticated product integration. Broad application to diverse geo-engineering and earth science problems.

Combine geometries and analyses in a single project

GeoStudio enables you to combine analyses using different products into a single modeling project, using the results from one as the starting point for another. Multiple geometries, including 1D, 2D, and 3D geometries, may also be included in a single file.

Draw geometry directly or import CAD files

GeoStudio provides many tools to define the model domain including coordinate import, geometric item copy-paste, length and angle feedback, region merge and split, and DWG/DXF file import. BUILD3D, GeoStudio's 3D geometry creation tool, offers a comprehensive suite of sketch features.

Solve multiple analyses simultaneously

GeoStudio runs each analysis solver in parallel, allowing multiple analyses to be solved efficiently on computers with modern, multi-core processors. This saves substantial solve time especially for large 3D analyses.

Interpret results with visualization & graphics

GeoStudio provides powerful visualization tools, including graphing, contour plots, isolines or isosurfaces, animations, interactive data queries and data exports to spreadsheets for further analysis.

Click a product in the diagram to learn more.

How SLOPE/W works with other GeoStudio products

Use pore-water pressures from SEEP/W, SEEP3D, SIGMA/W, or QUAKE/W

Using 2D or 3D finite element computed pore-water pressures in SLOPE/W makes it possible to deal with highly irregular saturated/unsaturated conditions or transient pore-water pressure conditions in a stability analysis. For example, you can analyze changes in stability as the pore-water pressure changes with time.

Use stresses from SIGMA/W or QUAKE/W

Using finite element computed stresses in SLOPE/W allows you to conduct a stability analysis in addition to a static deformation or dynamic earthquake analysis. For example, you can compute the minimum factor of safety that will be reached during an earthquake, or you can find the resulting permanent deformation, if any, using a Newmark-type procedure.

How SEEP/W works with other GeoStudio products

Dissipate excess pore-water pressures generated by SIGMA/W or QUAKE/W

Excess pore-water pressures generated by static loading (e.g., fill placement) or by dynamic motion during an earthquake can be brought into SEEP/W to study how long it takes to dissipate the excess pressures.

Use SEEP/W pore-water pressures in SLOPE/W

Using finite element computed pore-water pressures in SLOPE/W makes it possible to deal with highly irregular saturated / unsaturated conditions or transient pore-water pressure conditions in a stability analysis. For example, you can analyze changes in stability as the pore-water pressure changes with time.

Use SEEP/W data inside a CTRAN/W model for contaminant transport or a TEMP/W model for convective heat transfer analysis.

Add SEEP3D to SEEP/W to investigate 3D groundwater flow.

How SIGMA/W works with other GeoStudio products

Use SIGMA/W stresses in SLOPE/W or QUAKE/W

Using finite element computed stresses in SLOPE/W makes it possible to conduct a rigorous stability analysis using the same stress values resulting from the deformation analysis. In addition, you can use SIGMA/W stresses as the initial stress state for a dynamic earthquake analysis in QUAKE/W.

Use SIGMA/W pore-water pressures in SLOPE/W or SEEP/W

Excess pore-water pressures generated by static loading, such as fill placement, can be brought into SEEP/W to study how long it takes to dissipate the excess pressures in the foundation. You can use SLOPE/W to analyze the effect of these excess pressures on stability during construction, allowing you to determine the need for staged loading.

How QUAKE/W works with other GeoStudio products

Use QUAKE/W results in a SLOPE/W stability analysis

Earthquake shaking of ground structures creates inertial forces that may affect the stability of the structures. The shaking may also generate excess pore-water pressures. Both the dynamic stress conditions and the generated pore-water pressures can be taken into SLOPE/W to study how an earthquake affects the earth structure stability and deformation. SLOPE/W can perform a Newmark-type of deformation analysis to determine the yield acceleration and estimate the permanent deformation of the earth structure.

Dissipate excess QUAKE/W pore-water pressures in SEEP/W

Excess pore-water pressures generated during an earthquake can be brought into SEEP/W to study how long it will take to dissipate them.

How TEMP/W works with other GeoStudio products

Use TEMP/W with SEEP/W to simulate interactions at the ground surface

Measured climate data can be imported into a coupled TEMP/W and SEEP/W analysis to determine the actual ground surface temperatures with or without snowpack, and actual evaporation rates. TEMP/W will use precipitation data to accumulate snow depths over the winter. An energy balance approach is used to calculate ground temperatures beneath snow and to melt snow during the spring. This information is used by SEEP/W to determine surface ponding, runoff and infiltration.

Use SEEP/W water flow in TEMP/W

An important consideration in a heat transport analysis is water movement, which can be obtained from a SEEP/W analysis. Once this water flow is known, it can be used in TEMP/W to study its impact on heat transfer.

Couple TEMP/W with SEEP/W or AIR/W to perform a density dependent fluid flow analyses.

How CTRAN/W works with other GeoStudio products

Use SEEP/W velocities in CTRAN/W

One of the major components in a contaminant transport analysis is the velocity of the water, which can be obtained from a SEEP/W analysis. Once this velocity is known, it can be used in CTRAN/W to study the transport of contaminants.

Perform density dependent analyses with CTRAN/W and SEEP/W

In density dependent fluid flow, the velocity of the water is dependent on the solute concentration. The water velocity in turn influences the movement of the solute. The iterative transfer of water velocity from SEEP/W to CTRAN/W and the transfer of concentration from CTRAN/W to SEEP/W makes it possible to analyze density dependent fluid flow.

How AIR/W works with other GeoStudio products

Use AIR/W data in TEMP/W

AIR/W and SEEP/W integrate with TEMP/W so that you can model convective heat transfer due to moving air and water. Conversely, you can have the thermal solution affect the air densities and pressures in AIR/W so that the air will flow based on thermal processes alone. AIR/W passes air content and mass flow vectors to TEMP/W and it returns the new temperature profile to AIR/W. All of this happens automatically based on your analysis type definition.