Lỗi a failure may be imminent and cause unpredictable fail năm 2024

You’re probably reading this because you’ve received the error message “SMART failure predicted on hard disk”.

As a result, you were then wondering, “how to check for hard drive failure?” “Can I bypass smart failure predicted on hard disk?”

It might be a little bit of a shock to find that your hard drive is failing and that you’ll have to replace it.

Thankfully, this is still a salvageable situation, and you’ll be able to use your computer as usual in no time.

Most computers do fail over time, where either small components such as the fan fail or the entire motherboard.

After you’ve had your laptop or desktop computer for a while, it may show signs of failure such as sudden app crashes and “blue screens of death” (BSOD). This is your computer telling you “Hey, I need a repair ASAP!”.

These errors do sometimes come with pretty handy reference messages or codes. Error codes help to direct you to which part of the computer is failing so you have a general idea of what to do.

The SMART function on your hard drive can check for hard drive failure. Hard drive failure can happen to a lot of computer users, as they don’t usually last very long.

If you’ve had your computer for a while, you might notice it start to run slower than usual or lose files for no reason. This means you might have a hard drive issue and will need a replacement.

The error message “SMART failure predicted on hard disk” naturally means a hard disk failure. In this guide, we will cover how to test your hard drive and fix “SMART failure predicted on hard disk”.

What is SMART?

SMART stands for “Self-Monitoring Analysis and Reporting Technology”. It is included in hard drives made by Western Digital, Seagate, Fujitsu, and more. As a diagnostic method, it tests for upcoming issues and failures on a hard drive.

When a hard drive has come to the point where it has become unusable, it is reported as a SMART failure. While it can’t detect or predict all hard drive issues, it’s still a helpful tool to find problems before the drive inevitably fails.

“SMART failure predicted on hard disk”

This error message comes at Windows boot up, and prompts you to back up and replace your hard drive. This means that your hard drive hasn’t failed yet, but is getting close to that.

Hard drive failure does eventually happen to every hard drive, and can be caused by damage or an accumulation of too many bad sectors.

Once your hard drive reaches a large amount of bad sectors, the damage will become intolerable to use. Any further damage from bad sectors will cause things like data loss or corruption.

Bad sectors, bad blocks and why you can’t avoid them

Bad sectors are mostly caused by physical damage or software issues. Traditional spinning hard disk drives contain moving parts that are difficult to maintain.

This delicate machinery is vulnerable to physical damage, causing hard bad sectors. Hard bad sectors are permanent damages and can only be marked to be skipped over.

On the other hand, soft bad sectors caused by software issues can be repaired by disk checking software. They can be the result of a range of things: improper shutdown of apps, abrupt computer shutdown while the drive is writing information, or even virus problems.

A large accumulation of bad sectors on any sort of drive, from hard disk drives to solid-state drives can shorten its lifespan and escalate its failure.

Need same-day computer repairs and IT services?

Safemode Computer Service is rated in the Best 3 computer repair centers in Sydney from 2016 to 2023. Walk-in or book an appointment to get a Free quote today.

If you have ever searched "hard disk failure is imminent" on the internet, you may find there are many related topics. Now, let's have a closer look at this issue.

When starting my computer, I sometimes get a message, saying, ‘Hard disk failure is imminent. Please back up your hard disk and have it replaced. Press F10 for Setup. F2 to continue.’ The first time I got this screen it clicked on F2, Windows opened and all seemed fine. But now my computer run into the same issues: A black screen with same message, but the F2 key is not working when I click on it. Is the drive really dying? But I don’t have a backup for my hard disk yet. What can I do to save this situation or am I just out of luck? Any assistance will be appreciated, thanks.

- Question from Answers.microsoft

Introduction of hard disk failure imminent and SMART

“Hard disk failure is imminent” error is a common issue reported by SMART in different computers, such as, HP, ASUS, Lenovo, etc. It’s also called “SMART failure predicted on hard disk", “SMART check Failure”, “SMART Hard Drive detects imminent failure”, etc.

SMART, Self-Monitoring Analysis and Reporting Technology, is a firmware that resides into most modern hard disks (HDD) and solid-state drives (SSD), which can continuously keep track of hard disk condition such as health, performance and error rates. In addition, it still has a technology known as predictive failure analyst that can report the problems to system when your hard disk is in trouble.

So, when hard disk detects imminent failure, you may receive one of the above error messages according to your computer and its motherboard.

What does hard drive failure imminent mean?

When your computer says hard disk failure imminent, it means your hard drive right now is not yet dead, but will be sooner or later. It's just a matter of time. It could be in 1 hour, could be in a week. Who knows?

And A SMART hard drive failure may come out for many different factors such as bad sectors, higher temperature, physical damage like hardware failure and firmware corruption, virus, power issues, etc. So far, there is no reliable way to prevent.

So, you need to follow the prompts to backup your hard disk and have it replaced. Otherwise, in the future, you may loss some of your important files, or your entire dive may stop working completely.

Can you fix hard disk failure imminent?

Hard disk failure is a fact that many of us have experienced, and not with fond memories. As the SMART tell you: "Please backup your hard disk and have it replaced!" It's the sure-fire way to get rid of this issue.

Also, this problem may be caused by a software or fireware error, which can be fixed by disk check utility in Windows 7, 8, 10, 11.

*There is possibility that you have a bad hard drive driver controller or cables. You can first test with different cables or on a different computer. If this is not the problem, then try the following:

Solution 1: Make a backup in case of hard disk failure imminent

To minimize data loss in case of hard disk failure imminent, the most secure way is to do as suggests - backup your hard disk and have it replaced. Now, all you need is to find a trust and reliable backup software. Here I recommend you AOMEI Backupper Standard.

This software is very easy to use, even for beginners, thanks to its clear interface, user friendly design and fixed steps, so you can backup hard drive or data to external hard drives, networked drives, NAS devices, USB flash drives easily and quickly. Meanwhile, it still offers you some features that can bring you convenience.

Compatibility: It works with any computer running Windows 11, 10, 8.1/8, 7, Vista, XP. Full disk backup: You can back up the entire hard drive, or back up OS, partitions, files as you like. Backup options: Encrypt backup sensitive data, compress image file, split large backup into smaller ones. Backup mode: The default intelligent sector mode helps you back up only used sectors to save storage space.

You can download and install the freeware to proceed:

Backup your hard disk and have it replaced

Then, connect the prepared disk and fix “smart hard disk error imminent failure” with the following steps.

1. Launch the main interface, select "Backup" -> "Disk Backup" as shown below. To backup only important files, click “File Backup” instead.

2. Click “Add Disk”, then select the disk with SMART hard disk failure imminent and click “OK” to exit.

3. Click where the arrow point and select the prepared storage device, such as, external hard drive, USB flash drive, network drive or NAS as storage device. Then, click "Start Backup".

Notes: • You can configure disk backup settings by clicking "Options", and select compress level, intelligent sector backup, etc. • Also, it is highly recommended to schedule backup hard disk via “Schedule”. Because you cannot predict the time of hard disk failure. You can choose daily, weekly, monthly, incremental or differential backup. (Differential backup is supported by Professional edition).

4. After the process 100% ends, you can restore the disk image to another hard disk and boot from it.

Just connect the new hard disk to the computer, open this backup and restore software, click “Restore” and “Select Image File” to find the image file, tick “Restore the entire disk ”, then select the connected hard disk as destination and click “Start Restore”.

Solution 2: Fix hard disk failure is imminent using disk check utility

Disk Check utility is a built-in tool for Windows that can scan & fix hard drive errors, bad sectors, file system errors. Please note that the steps are a little difference in different operating system.

Here, I'll take Windows 10 as an example to show you how to fix hard drive failure is imminent in HP/Dell/Notebook and Lenovo Thinkpad. If you are using Windows 7 or 8, you can search detailed steps online.

1. Open Computer or This PC, then right-click the disk with hard drive failure imminent and select Properties from the context menu.

2. Click the Tools tab and Check option subsequently, then tap on Scan Drive to continue. Just wait and it will repair the erro it found. If not, it will show you details.

Note: If you are familiar with command prompt, you can open command prompt window and type chkdsk /f/r and hit Enter.

Conclusion

Backing up hard disk regularly is the best practice to prevent hard disk failure is imminent and other disk error in Windows 7/8/10. If you don't want to lose any of your important data on a disk, please backup your disk with schedule backup settings. It reduces the trouble of manually backup, and ensures the modified files and recently installed programs are backed up.

Once the hard disk eventually failed, you can replace it with a new hard drive and perform disk restore. If you encounter "hard disk imminent failure won't boot", you can create a bootable media on other working computers first, use it to boot the computer into WinPE and perform system restore.