Which of the following device is used to connect two LANs with different protocol?
|
This article lists 100 Network Devices MCQs for Engineering Students. All the Network Devices Questions & Answers given below includes solution and link wherever possible to the relevant topic. This is helpful for users who are preparing for their exams, or interviews, or professionals who would like to brush up on the fundamentals of the network devices. Show In the modern world, the hub, computer, repeater, switch, modem, router, firewall, gateway, and network interface cards are few network devices. The modems are of two types internal and external modems, the devices that are fixed inside the computer are the internal modems and the devices that are connected externally to the computer are the internal modems. The hub works on the physical layer of the OSI model, it is one type of broadcast device which is used to connect the devices in the same network. The hub sends the data in the form of binary bits and it only works in half-duplex. The hub doesn't store any IP addresses or MAC addresses and in the hub, only one device can send data at a time. The switch works on the data link layer of the OSI model, it is one type of multicast device which is used to connect the devices in the same network. The switch sends the data in the form of frames and it only works in full-duplex. The switch stores MAC addresses and in the switch, multiple devices can send data at the same time. The router works on the network layer of the OSI model which is used to connect two or more different networks. The router sends the data in the form of packets and it only works in full-duplex. The router stores IP addresses and in the router, multiple devices can send data at the same time. 1). Which one of the following network devices stores the IP addresses? Router Switch Both a and b None of the above Hint 2). Which one of the following returns a string of characters? Chargen Quote Daytime All of the above Hint 3). What is the standard form of SNMP? Simple Network Management Protocol Simple Network Protocol Simple Management Protocol None of the above Hint 4). The bridge network device is categorized into ______________ types? Hint 5). In which layer does the bridge network device operates? Datalink layer Physical layer Both a and b None of the above Hint 6). How many types of routers are there? Hint 7). Which one of the following network devices connects two networks? Bridge Hub Repeater Gateway Hint 8). What is the standard form of ARP? Address Resolution Protocol Address Register Protocol None of the above Hint 9). The frame processing delay is less in ______________ type of bridge? Transparent Source routing Both a and b None of the above Hint 10). What is the standard form of MSAU? Multistation access Unit Media access Unit Both a and b None of the above Hint 11). Which one of the following divides the larger networks into smaller networks or smaller sections? Bridge Hub Repeater Gateway Hint 12). What is the standard form of ISDN? Integrated Services Digital Network Integrated Sample Digital Network Integrated Serial Digital Network None of the above Hint 13). Which one of the following network device work in the network layer? Router Switch Both a and b None of the above Hint 14). Which one of the following firewalls is a software-based firewall? Network-based firewall Host-based firewall Both a and b None of the above Hint 15). What is the standard form of UTM? Unified Threat Management Unified Type Management Undefined Threat Management None of the above Hint 16). Which one of the following network devices has only two ports? Router Bridge Both a and b None of the above Hint 17). Which one of the following network devices doesn’t use any routing table for sending the data? Router Bridge Both a and b None of the above Hint 18). Which one of the following network devices transmits the data in the form of packets? Router Bridge Both a and b None of the above Hint 19). The spanning tree is not possible in _______________ network device? Hub Switch Both a and b None of the above Hint 20). Which one of the following network devices works on the data link layer of an OSI model? Hub Switch Both a and b None of the above Hint 21). Which one of the following network devices is the routing device? Hub Router Both a and b None of the above Hint 22). Which one of the following network devices is used to connect different networks? Hub Switch Router None of the above Hint 23). Which one of the following network devices is a sophisticated device? Hub Switch Both b and a None of the above Hint 24). The bridge network device works on ________________ broadcast domain? Single Double More than a single None of the above Hint 25). The router network device works on ________________ broadcast domain? Single Double More than a single None of the above Hint Network Devices MCQs for Exams26). Which one of the following is an example of routed protocol? IP, NetWare RIP BGP All of the above Hint 27). Which one of the following addresses is used by IPX/SPX and TCP/IP? MAC Logical Both a and b None of the above Hint 28). Which one of the following network devices connects the devices in a twisted pair? Hub Switch Bridge Both a and b Hint 29). Which one of the following network devices supports MPLS and VPN? Layer 3 switch Router Both b and a None of the above Hint 30). What is the standard form of SMLI? Stateful Multilayer Inspection Stateful Multilayer Information Stateful Multilayer Inspection integration None of the above Hint 31). Which one of the following bridges doesn’t support multipath routing? Transparent bridge Source routing bridge Both a and b None of the above Hint 32). Which one of the following network devices doesn’t support both dynamic and static routing? Gateway Router Both a and b None of the above Hint 33). Which one of the following network devices is an internetworking device? Modem Router Both a and b None of the above Hint 34). Which one of the following network devices provides security measures to protect the network? Modem Router Both a and b None of the above Hint 35). Which one of the following is a second-generation firewall? Packet filtering Stateful inspection Both a and b None of the above Hint 36). Which one of the following network devices is hosted on a dedicated/virtual appliance or physical server? Router Gateway Both a and b None of the above Hint 37). Which one of the following network devices can work with dissimilar networks? Router Gateway Both a and b None of the above Hint 38). The application-level awareness is not supported in ______________ firewall? Traditional Next-generation oth a and b None of the above Hint 39). The reputation and identity services are supported in _____________ firewalls? Traditional Next-generation Both a and b None of the above Hint 40). Which one of the following network devices works on the network layer of an OSI model? Hub Router Both a and b None of the above Hint 41). Which one of the following network devices is the broadcast device? Hub Router Both a and b None of the above Hint 42). Which one of the following network devices is used to create a network? Hub Switch Router None of the above Hint 43). Which one of the following network devices supports both dynamic and static routing? Gateway Router Both a and b None of the above Hint 44). Which one of the following network devices can’t perform packet filtering? Bridge Repeater Both a and b None of the above Hint 45). Which one of the following is a first-generation firewall? Packet filtering Stateful inspection Both a and b None of the above Hint 46). Which one of the following network devices is hosted on a dedicated appliance only? Router Gateway Both a and b None of the above Hint 47). Which one of the following network devices can work with similar networks? Router Gateway Both a and b None of the above Hint 48). Which one of the following network devices doesn’t have any security measures to protect the network? Modem Router Both a and b None of the above Hint 49). Which one of the following bridges supports multipath routing? Transparent bridge Source routing bridge Both a and b None of the above Hint 50). Which one of the following network devices stores the MAC addresses? Router Switch Both a and b None of the above Hint Network Devices MCQs for Interviews51). Which one of the following bridge services is connectionless? Transparent bridge Source routing bridge Both a and b None of the above Hint 52). What is the standard form of ICMP? Internet Control Message Protocol Internet Communication Message Protocol Internet Common Message Protocol None of the above Hint 53). Which one of the following network device work in the data link layer? Router Switch Both a and b None of the above Hint 54). Which one of the following firewalls is a hardware-based firewall? Network-based firewall Host-based firewall Both a and b None of the above Hint 55). What is the standard form of NGFW? Network Address Transaction Next-Generation Firewall Network Address Firewall None of the above Hint 56). Which one of the following network devices has more than two ports? Router Bridge Both a and b None of the above Hint 57). Which one of the following network devices uses a routing table for sending the data? Router Bridge Both a and b None of the above Hint 58). Which one of the following network devices transmits the data in the form of frames? Router Bridge Both a and b None of the above Hint 59). The spanning tree is possible in _______________ network device? Hub Switch Both a and b None of the above Hint 60). What is the standard form of SCTP? Stream Control Transmission Protocol Stream Communication Transmission Protocol Stream Common Transmission Protocol None of the above Hint 61). Which one of the following network devices works on the physical layer of an OSI model? Hub Switch Both a and b None of the above Hint 62). Which one of the following network devices is the multicast device?
Router Switch Both a and b None of the above Hint 63). Which one of the following network devices works in half-duplex? Router Switch Hub None of the above Hint 64). Which one of the following network devices is used to connect multiple devices? Hub Switch Router None of the above Hint 65). Which one of the following network devices is not an intelligent device? Hub Switch Router None of the above Hint 66). Which one of the following is an example of a routing protocol? IP, NetWare RIP BGP Both b and c Hint 67). Which one of the following network devices is a breakup broadcast domain? Bridges Switch Router All of the above Hint 68). What is the standard form of NIC? Network Interface Card Network Internal Card Network Information Card None of the above Hint 69). The network adapters are categorized into _______________ types? Hint 70). What is the standard form of TCP? Transmission Control Protocol Transmission Communication Protocol Transmission Common Protocol None of the above Hint 71). Which one of the following network devices uses a table to store the information? Hub Switch Router Both b and c Hint 72). Which one of the following network devices uses bits or electrical signals to send the data? Hub Switch Router Both b and c Hint 73). Which one of the following can’t be used as a repeater? Hub Switch Both b and a None of the above Hint 74). What is the standard form of EIGRP? Enhanced Interior Gateway Routing Protocol Enhanced Internal Gateway Routing Protocol Enhanced Interference Gateway Routing Protocol None of the above Hint 75). Which one of the following network devices divides the network to reduce the traffic? Hub Switch Bridge Both a and b Hint Network Devices MCQs for Quiz76). Which one of the following network devices supports edge technologies? Router Layer 3 switch Both a and b None of the above Hint 77). What is the standard form of POLAN? Passive Optical Local Area Network Passive Optional Local Area Network Practical Optical Local Area Network None of the above Hint 78). What is the standard form of EPN? Enterprise Private Network Enterprise Public Network Enterprise Private and Public Network None of the above Hint 79). Which one of the following network devices is used to extend LAN? Bridge Repeater Both a and b None of the above Hint 80). What is the standard form of TELNET? Transmission Network Transport Network Terminal Network None of the above Hint 81). Which one of the following network devices works in full-duplex? Router Switch Hub Both a and b Hint 82). Which one of the following network devices doesn’t store any IP address or MAC address? Router Switch Hub Both a and b Hint 83). In which one of the following network devices only one device can send data at a time? Router Switch Hub None of the above Hint 84). Which one of the following network devices reads frames to send the data? Hub Switch Router Both b and c Hint 85). What is the standard form of BGP? Border Gateway Protocol Balanced Gateway Protocol Bridge Gateway Protocol None of the above Hint 86). Which one of the following addresses is used by bridges, routers, and switches? MAC Logical Both a and b None of the above Hint 87). The forwarding decision in layer 3 switch is performed by _____________ ? Software ASICS Both a and b None of the above Hint 88). Which one of the following network devices doesn’t support edge technologies? Router Layer 3 switch Both a and b None of the above Hint 89). Which one of the following network devices expands the limit of the signal in the network? Bridge Repeater Both a and b None of the above Hint 90). What is the standard form of RPC? Remote Procedure Call b) c)d) Remote Procedure Communication Remote Procedure Control None of the above Hint 91). Which one of the following network devices is an intelligent device? Hub Switch Router Both b and c Hint 92). Which one of the following network devices doesn’t use any table to store the information? Hub Switch Router Both b and c Hint 93). Which one of the following network devices reads packets to send the data? Hub Switch Router Both b and c Hint 94). Which one of the following can be used as a repeater? Hub Switch Both b and a None of the above Hint 95). The frame processing delay is more ______________ type of bridge? Transparent source routing Both a and b None of the above Hint 96). What is the standard form of NAT? Network Address Transaction Network Address Transistor Network Address Transformer None of the above Hint 97). Which one of the following network devices is not a sophisticated device? Hub Switch Both b and a None of the above Hint 98). The forwarding decision in router is performed by _____________ ? Software ASICS Both a and b None of the above Hint 99). Which one of the following network devices doesn’t support MPLS and VPN? Layer 3 switch Router Both b and a None of the above Hint 100). Which one of the following is a third-generation firewall? Packet filtering Application layer firewall Both a and b None of the above Hint Which device is used to connect LAN to another LAN protocol?Concept: The bridge is used to connect similar LANs with the same protocols. A bridge operates at the data link layer. It is also used for interconnecting two LANs working on the same protocol.
Which of the following is used to connect two networks with different protocols?But if there are two systems on the same network and using different protocols, and we want to connect them we use interface BRIDGE. There the right answer is bridge.
What device is used to connect two LANs together?Router: A router is a device that connects two distinct networks.
|
